APEXTURBO 20W-50 CH-4 diesel engine oil is formulated with high quality base stocks and specially selected addives to ensure opmum performance and protecon for diesel engines requiring an API CH-4 specificaon. Suitable for modern and old diesel engines fied on trucks, buses, construcon or agricultural machinery with or without turbo charger, intercooler or sophiscated injecon systems.
APEX TURBO 20W-50 CH-4
APEXTURBO 20W-50 CH-4 diesel engine oil is formulated with high quality base stocks and specially selected addives to ensure opmum performance and protecon for diesel engines requiring an API CH-4 specificaon. Suitable for modern and old diesel engines fied on trucks, buses, construcon or agricultural machinery with or without turbo charger, intercooler or sophiscated injecon systems.
Features & Benefits
- Improved oxidation & thermal stability reduces sludge build-up and keeps the engine cleaner.
- Excellent wear protection to extend engine efficiency and service life.
- Improved fuel economy, due to high fluidity at low temperatures.
- Reduced oil consumption.
- Improved resistance to deposit formation keeps engine clean to give your vehicle maximum power under
extreme conditions. - Enhanced TBN reserves provide improved acid neutralization and corrosion protection
Specificaons
APEXTURBO 20W-50 CH-4 meets or exceeds following Internaonal and Builder specificaons:
- API CH-4
- CG-4
- CF-4
- CF
- SL
- SJ
- ACEA E7/A3/B4
- CAT ECF-1a
- MTU OIL Category-2
- MAN M3275
- MACK EO-M Plus
- VOLVO VDS-2
- CUMMINS CES 20076/7
- Deutz DQC –II-05
- Renault RD-2
- MB 228.3
Typical Characteristics
| Parameter | Test Method | Units | 20W-50 |
|---|---|---|---|
| APEX SPARK CH-4 | Test Method | Units | 20W-50 |
| Density @ 15 °C | ASTM D 4052 | gm/cc | 0.890 |
| Viscosity @ 100 °C | ASTM D 445 | cSt | 20.4 |
| Viscosity @ 40 °C | ASTM D 445 | cSt | 175 |
| Viscosity Index | ASTM D 2270 | – | 137 |
| Pour Point | ASTM D 97 | °C | -27 |
| Flash Point (COC) | ASTM D 92 | °C | 236 |
| Flash Point (PMCC) | ASTM 0 93 | °C | 234 |
| Ignition Point | ASTM D 92 | °C | 240 |
| Total Acid Number | ASTM 664 | mgKOH/g | 2.50 |
| Sulfated Ash | ASTM D874 | 1.2 | |
| Conradson Carbon Residue CCR | ASTM D 189 | 1 | |
| Copper Corrosion at 100c,3hr | ASTM 0 130 | – | <1A |
| Total Base Number | ASTM 0 2896 | mg KOH/g | 10.0 |
| CCS Viscosity | ASTM D 5293 | cP | 7060 @ -15 °C |
| CCS Viscosity | ASTM D 5293 | cP | 11980 -20°C |
| Foam Characteristics | ASTM D 892 | ml | |
| SEQ I | 0/0 | ||
| SEQ II | 0/0 | ||
| SEQ III | 0/0 |
Quantity
- 1L
- 4L
- 5L
- 20L
- 25L
- 208L
Reviews
There are no reviews yet.