APEX TITAN PROTECT HT-EP series are high-temperature greases, formulated with bentonite clay-based thickener and extreme pressure additive system to protect against wear, rusting, and water washout, especially in industrial equipment operating under heavy loads and high temperatures. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 150 & 320. It retains its consistency at high temperatures and provides good storage stability.
APEX TITAN PROTECT HT-EP
APEX TITAN PROTECT HT-EP series are high-temperature greases, formulated with bentonite clay-based thickener and extreme pressure additive system to protect against wear, rusting, and water washout, especially in industrial equipment operating under heavy loads and high temperatures. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 150 & 320. It retains its consistency at high temperatures and provides good storage stability.
Features & Benefits
-
Outstanding Non-melting capability – protects bearing at very high operating temperatures where
conventional soap-based greases fail to provide satisfactory lubrication. -
Good extreme pressure & an-wear properties – protects bearing surfaces against severe wear, even under
high load conditions. -
Excellent Oxidation and Thermal stability – protects against deposit formation at very high operating
temperatures, thus maintaining the life and performance of the grease. -
Excellent resistance to water washout – resists washout of grease in equipment and provides good lubrication
even in the presence of water. -
Excellent retention of consistency – resists grease spending in application, where very high temperatures and
mechanical working leads to the subsequent loss of lubrication performance and leakage.
Application
APEX TITAN PROTECT HT-EP series is suitable for below applications:
- Drying Ovens
- Jaw Crushers
- Kiln cars
- Steel Mills
- Hot Rolling Mills
- Aluminum, Cement, Glass, and Rubber plants
Typical Characteristics
Typical Characteristics
The above figures are typical of blends with normal production tolerance and do not constitute a specification.
| Apex Titan Grease | Test Method | Units | HT-EPOO | HT-EPO | HT-EP1 | HT-EP2 | HT-EP3 |
|---|---|---|---|---|---|---|---|
| NLGI Grade | ASTM D 217 | — | 0 | 0 | 1 | 2 | 3 |
| Thickener Type | — | — | Bentonite Clay | Bentonite Clay | Bentonite Clay | Bentonite Clay | Bentonite Clay |
| Penetration, Worked @ 25 °C | ASTM D 217 | 0.1mm | 400-430 | 355-385 | 310-340 | 265-295 | 220-250 |
| Viscosity @ 40 °C | ASTM D 445 | cSt | 32 | 160 | 160 | 160 | 160 |
| Dropping Point | ASTM D 566 | °C | 03> | 03> | 03> | 03> | 03> |
| 4-Ball Wear, Scar | ASTM D 2266 | mm | 0.5 | 4.0 | 4.0 | 4.0 | 4.0 |
| 4 Ball Weld Load | ASTM D 2596 | Kg | 42 | 52 | 52 | 52 | 52 |
Quantity
- 1L
- 4L
- 5L
- 20L
- 25L
- 208L
Reviews
There are no reviews yet.