APEX Xtreme Protect Grease CS-2 is a high-performance grease, made of the NEW GENERATION calcium sulfonate complex soap designed by APEX Lubricants. This new soap has enhanced properties in terms of water resistance, load capacity, thermal resistance, and anticorrosion properties while keeping a very high level of permeability and the ability to lubricate well in case of high speeds.
APEX Xtreme Protect Grease CS-2
APEX Xtreme Protect Grease CS-2 is a high-performance grease, made of the NEW GENERATION calcium sulfonate complex soap designed by APEX Lubricants. This new soap has enhanced properties in terms of water resistance, load capacity, thermal resistance, and anticorrosion properties while keeping a very high level of permeability and the ability to lubricate well in case of high speeds.
Features & Benefits
-
Calcium Sulphonate complex soap developed by APEX Lubricants allows APEX Xtreme Protect Grease CS-2 to
work well in bearings even if rotation speeds are high. Presents outstanding performances even at high nDm
where the NEW GENERATION keeps all benefits in terms of corrosion protection, bearings lifetime, high loads, and thermal resistance. -
Excellent an-oxidation and an-corrosion properties thanks to the excellent behavior of the calcium
sulphonates, also in the presence of seawater. -
The NEW GENERATION of calcium sulphonate complex soap allows keeping outstanding performances even in
case of high-speed applications where normally polyurea or lithium complex greases are requested. -
Does not contain lead, or other heavy metals considered harmful to human health and the environment.
Application
APEX Xtreme Protect Greases are suitable for most types of Marine, Automotive & Industrial applications.
- Suitable for the lubrication of continuous casting and rolling mills in steel plants, bearings in wet and dry (felt
rolls) seconds of paper mills and all industrial applications under severe conditions (wet, loaded, high
temperature, dust, etc.,) - Suitable for the lubrication of all kinds of components subject to high loads, shock loads, working in
conditions where the grease is in frequent contact with water (even in seawater due to enhanced rust
performance of the grease). - Suitable for use in centralized greasing systems.
- Always avoid contamination of the grease by dust and/or dirt when applying.
- Preferably use a pneumatic pump system.
Specifications
Meets & exceeds the following Industry specifications:
- ISO 6743-9: L-XCFIB1/2
- DIN 51 502: KP1/2R-30
Typical Characteristics
| APEX Xtreme Protect Grease CS-2 | Test Method | Units | CS-2 |
|---|---|---|---|
| NLGI Grade | ASTM D 217/DIN 51 818 | — | 1-2 |
| Thickener Type | — | — | Calcium Sulphonate |
| Penetration, Worked @ 25 °C | ASTM D 217/DIN 51 818 | 0.1mm | 280-310 |
| Penetration, Worked @ 25 °C, after 100,000 strokes | ISO 2137 | 0.1mm | +11 |
| Shell Roller 100 hours at 80°C | ASTM D 1831 mod | 0.1mm | -8 |
| Shell Roller 100 hours at 80°C + 10% water | ASTM D 1831 mod | 0.1mm | -12 |
| Kinematic viscosity of the base oil at 40°C | ASTM 0 445/DIN 51 562-1/ISO 3104/IP71 | mm2/s (cSt) | 220 |
| Operating temperature range | — | °C | -30 to 180 |
| Antirust properties | |||
| EMCOR, distilled water | ISO 11007 | Rating | 0-0 |
| EMCOR, synthetic sea water | ISO 11007 | Rating | 0-0 |
| Copper corrosion, 24 hours at 100°C | ASTM D 4048 | Rating | lb |
| Antiwear and EP properties | |||
| Four ball wear (scar diameter) | ASTM D 2266 | mm | 0.37 |
| Four ball load | ASTM D 2596 | Kgf | 500 |
| Cold properties | |||
| Penetration at -20°C | ISO 13737 | 0.1mm | 160 |
| Flow pressure at -20°C | DIN 51 805 | mbar | 560 |
| Flow pressure at 1400 mbar | DIN 51 805 | °C | -30 |
| Torque at -20°C Starting torque After 1 hour | ASTM D 1478 | g.cm g.cm | 2600 460 |
| Thermal Stability | |||
| Dropping point | IP 396/ASTM D566 | °C | >300 |
| Oxidation stability at 99°C +0.5°C Pressure drop after 100 hours Pressure drop after 500 hours |
ASTM D 942 | Psi Psi | 4 13.5 |
| Oil release 50 hours, 100 °C | ASTM 0 6184 | % | 1.4 |
| Oil release 168 hours, 40°C | NF T 60-191 | % | 0.9 |
The above figures are typical of blends with normal production tolerance and do not constitute a specification.
Quantity
- 1L
- 4L
- 5L
- 20L
- 25L
- 208L
Reviews
There are no reviews yet.